The installation of the valve is the key to determine the service life of the Triple Eccentric Butterfly Valve. Improper installation of the valve makes it possible to degrade the performance of the valve. Therefore, before installing the Triple Eccentric Butterfly Valve, the following points should be confirmed:

1. Carefully disassemble and assemble the package of the valve, check the label or label against the list of materials, specifications and details to ensure that it meets the requirements of the order.
2. Attention must be paid to the special warning label or label attached to or accompanied by the valve and appropriate measures should be taken.
3. Check the sign indicating the flow direction of the valve. If the flow direction is indicated, the valve shall be installed in accordance with the specified flow direction.
4. Check whether the inside of the valve is clean, foreign body and harmful corrosion through the channels at both ends of the valve. Remove special packaging materials.
5. Before installing the valve, check whether the pipeline connected with the valve is clean and whether there are foreign bodies. When the pipeline where the valve is located is fully installed and the pipeline strength is tested, the valve must be opened.
The above five points are the installation of the Triple Eccentric Butterfly Valve. The above five points should be paid special attention to when installing the Triple Eccentric Butterfly Valve
.