News
News
您的位置:主页 > News > Industry News >
What is the triple eccentric butterfly valve? Do you know triple eccentric butterfly valves?
1) the center line of the sealing surface of the disc / seat.
2) the position of the axis of the axis relative to the hole;
3) the axis of the valve seat cone angle deviating from the center line of the valve hole.
The triple offset combinations provide a conical seal face to minimize the wear between the seat and the seal, and improve the service life and sealing of the valve. In addition, reduce the valve seat's surface torque to the minimum and reduce the working torque of the valve.
Generally speaking, its sealing characteristics and cost are superior to other metal seated valve types. Because of its compact structure, the slewing design and lightweight structure are easy to install and operate, and they do not require tube support. The replaceable sealing ring allows for fast and simple maintenance and low torque (allowing smaller drives), which means more cost savings.
Two way zero leakage closed metal seat has only one soft seat valve. This will greatly expand the possibility of application. Flexible seal rings and optimal torque transmission, which means that these valves can provide fire safety design and sealing performance, which can be larger than the maximum temperature range of the general butterfly valve. Traditionally, oil and gas processing, oil refining, chemical and petrochemical plants, power generation, offshore platforms, heating, paper, steel Mills, sugar Mills, seawater desalination, water treatment and distribution may be found in a large number of industries. Their use in all industries has increased stringent government regulations and greater production demand, forcing users to seek solutions. Usage has also been climbing steadily for decades. The characteristics provide many good solutions, including those with greater challenges. These benefits include operational efficiency, wear-resistant materials and chemicals to a certain temperature or pressure, and versatile in many operating conditions.
1, the use of precision machined sealing surface and sealing ring to form metal to metal seal. Even in high temperature and high pressure and other harsh service environment, two-way seal and zero leakage can be achieved. The standard right angle conical design of low friction and streamline shape, metal can solve heat expansion and contraction of metal well, and it is an important feature of high temperature and high pressure environment service. Metal to metal seals are allowed to be used in oil fields with fire protection requirements.
2. The best seat cover design. The seat sealing surface is used to weld the Stellite hard alloy on the valve body. The seal face has longer life and better wear resistance, even if repeated cycle is used. The design of the sealing structure reduces friction with the butterfly plate and reduces the working torque.
3. Special valve seat design uses valve to automatically adjust valve seal. The floating seal ring and a wide sealing ring support gasket are more reliable by using sealing and opening and closing. This seat ensures that the valve has a two-way sealing feature.
4. The location pin of the valve is located at the very low position of the butterfly plate, allowing good thermal expansion performance and minimizing the disturbance of the stem. Therefore, the valve has a long service life.